Post by awebneck on Jun 22, 2017 14:00:45 GMT
I recently purchased a license for Unfold3D Mac based on my experience with the demo. In both cases, I am using 9.0.3 Revision 2611. However, there are some significant differences between the paid version and the demo that are causing me a few issues.
First, when opening an OBJ file, the Demo version issues this command (as seen in the Script and Command Log window):
U3dLoad({File={Path=“/Users/jeremy/Projects/C4D/Engine/components/pin.obj”, ImportGroups=true, XYZ=true}, NormalizeUVW=true})
However, when the same OBJ file is opened in the Paid version, the following command is used:
U3dLoad({File={Path=“/Users/jeremy/Projects/C4D/Engine/components/pin.obj”, ImportGroups=true, XYZ=true}})
Note the lack of the "NormalizeUVW" flag in the paid version - without this, the UVS are horrendously oversized.
Also, when unfolding the same OBJ with the same seams (via clicking the Unfold button in the lower left), the paid version issues this command:
U3dUnfoldPack({Unfold={PrimType=“Edge”, MinAngle=1e-05, Mix=1, Iterations=1, RoomSpace=3, PinMapName=“Pin”, ProcessNonFlats=true, ProcessSelection=true, ProcessAllIfNoneSelected=true, ProcessJustCut=true}, Pack={Box={0, 1, 0, 1}, SquareResol=1000, SpacingSize=2, MarginSize=0, ScalingReference=1, UseMultiUVGrid=false, MultiUVGridSizeU=10, MultiUVGridSizeV=10, OrientationKeepY=true, ProcessAllIfNoneSelected=true, TranslationEnabled=true, RotationEnabled=true}})
While the demo version issues this command:
U3dUnfoldPack({Unfold={PrimType=“Edge”, MinAngle=1e-05, Mix=1, Iterations=1, RoomSpace=0.003, PinMapName=“Pin”, ProcessNonFlats=true, ProcessSelection=true, ProcessAllIfNoneSelected=true, ProcessJustCut=true}, Pack={Box={0, 1, 0, 1}, SquareResol=1000, SpacingSize=0.002, MarginSize=0, ScalingReference=1, UseMultiUVGrid=false, MultiUVGridSizeU=10, MultiUVGridSizeV=10, OrientationKeepY=true, ProcessAllIfNoneSelected=true, TranslationEnabled=true, RotationEnabled=true, ScalingEnabled=true, UVLayoutScalingBestFit=true}})
Note the difference in the spacing SpacingSize, ScalingEnabled, and UVLayoutScalingBestFit flags.
Additionally, my mouse bindings are not being saved between sessions - every time I start the program fresh the bindings are reset to their defaults.
Please help me here, this program is effectively useless to me until these issues are fixed - the demo was great, but unless the paid version can be made to work the same I'm not going to be able to use this software.
First, when opening an OBJ file, the Demo version issues this command (as seen in the Script and Command Log window):
U3dLoad({File={Path=“/Users/jeremy/Projects/C4D/Engine/components/pin.obj”, ImportGroups=true, XYZ=true}, NormalizeUVW=true})
However, when the same OBJ file is opened in the Paid version, the following command is used:
U3dLoad({File={Path=“/Users/jeremy/Projects/C4D/Engine/components/pin.obj”, ImportGroups=true, XYZ=true}})
Note the lack of the "NormalizeUVW" flag in the paid version - without this, the UVS are horrendously oversized.
Also, when unfolding the same OBJ with the same seams (via clicking the Unfold button in the lower left), the paid version issues this command:
U3dUnfoldPack({Unfold={PrimType=“Edge”, MinAngle=1e-05, Mix=1, Iterations=1, RoomSpace=3, PinMapName=“Pin”, ProcessNonFlats=true, ProcessSelection=true, ProcessAllIfNoneSelected=true, ProcessJustCut=true}, Pack={Box={0, 1, 0, 1}, SquareResol=1000, SpacingSize=2, MarginSize=0, ScalingReference=1, UseMultiUVGrid=false, MultiUVGridSizeU=10, MultiUVGridSizeV=10, OrientationKeepY=true, ProcessAllIfNoneSelected=true, TranslationEnabled=true, RotationEnabled=true}})
While the demo version issues this command:
U3dUnfoldPack({Unfold={PrimType=“Edge”, MinAngle=1e-05, Mix=1, Iterations=1, RoomSpace=0.003, PinMapName=“Pin”, ProcessNonFlats=true, ProcessSelection=true, ProcessAllIfNoneSelected=true, ProcessJustCut=true}, Pack={Box={0, 1, 0, 1}, SquareResol=1000, SpacingSize=0.002, MarginSize=0, ScalingReference=1, UseMultiUVGrid=false, MultiUVGridSizeU=10, MultiUVGridSizeV=10, OrientationKeepY=true, ProcessAllIfNoneSelected=true, TranslationEnabled=true, RotationEnabled=true, ScalingEnabled=true, UVLayoutScalingBestFit=true}})
Note the difference in the spacing SpacingSize, ScalingEnabled, and UVLayoutScalingBestFit flags.
Additionally, my mouse bindings are not being saved between sessions - every time I start the program fresh the bindings are reset to their defaults.
Please help me here, this program is effectively useless to me until these issues are fixed - the demo was great, but unless the paid version can be made to work the same I'm not going to be able to use this software.