Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 7, 2017 21:35:41 GMT
I'm currently evaluating Unfold3d. It's a great piece of software, but I have some issues that keep me from loving it.
1. Lack of Modo bridge. I could potentially make one, but I don't have the time right now. But hopefully one might appear some time soon.
2. Lack of manual (or is there one and I haven't found it?). That combined with the fact that on MacOS (which I'm currently evaluating the software on), the tooltips don't seem to work makes me feel a bit lost.
3. The edge selection based on Angles is nice, but is there no way to select only hard edges? Especially when I want to make lightmap UVs, making sure there are seams on the hard edges is a must.
4. The auto orient feature sometimes messes up, which is true for all software, but I'm trying to find a way to fix them by selecting an edge that should be horizontal or vertical and have it fix the island orientation based on that (modo for example, has a tool that does this), but I couldn't find a way to do it without it distorting the overall island shape.
The last two could be features that are there but I'm unable to find. The lack of manual and tooltips certainly isn't aiding me.
Other than that, I'm finding it impressive.
|
|
|
Post by Vlad on Dec 8, 2017 15:46:08 GMT
1. Do it man, please, I need it too :-). I'm too nooby at coding. Modo sucks at packing and relaxing, that's too bad. U3D is a life saver. 2. Well, videos are quite good, check out first few that are quite recent. 3. You can, like in modo (since 10) select edges based on an angle. 4. This part helps to orient correctly. Watch the videos, I think it is explained there also. Good luck exploring U3D, welcome aboard.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 9, 2017 20:15:49 GMT
As I said, the angles tool is not what I want. I want to select all hard edges, and edges can be set to be hard regardless of angles. Also, the auto orient settings do not help me very much. As I said, it works fine, but when it messes up sometimes and I want to fix the orientation manually, I'm missing a tool which would work like this: Select an edge, and then it rotates the whole island (without distorting it) so that that edge is horizontal or vertical. Here's a gif: Am I making sense?
|
|
|
Post by joshpurple on Dec 9, 2017 22:13:35 GMT
As I said, the angles tool is not what I want. I want to select all hard edges, and edges can be set to be hard regardless of angles. Also, the auto orient settings do not help me very much. As I said, it works fine, but when it messes up sometimes and I want to fix the orientation manually, I'm missing a tool which would work like this: Select an edge, and then it rotates the whole island (without distorting it) so that that edge is horizontal or vertical. Here's a gif: Am I making sense? Hi Nick, I think I understand, & please feel free to correct me if I misunderstand. Your gif / animation is very helpful, thanks for that ! I'm guessing you want to stay in edge mode, & not do that in Island mode, -since you would like to have the pivot of your selected edge to work by? If you could select the Island, and then use the pivot point of that selected edge, would that be of use? (thinking that is what you mentioned; "Select an edge, and then it rotates the whole island (without distorting it) so that that edge is horizontal or vertical.").
|
|
|
Post by joshpurple on Dec 9, 2017 23:25:29 GMT
p.s. meaning to say, and pardon if you already know this, you can rotate snap from a selected point as pivot; (hope that helps, and glad to explain / show that )
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 10, 2017 1:14:19 GMT
We're not communicating correctly I think. I'll try my best to explain.
|
|
|
Post by Remi Arquier on Dec 10, 2017 10:56:36 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 10, 2017 18:55:12 GMT
Ah, cool, yes that is (almost) what I wanted. The only slight problem is that I need to re-optimize or re-unfold for it to work, right? I can work with this, but I think a button to just fix the orientation without having to re-optimize would be nice. Now if there would be a way to select all hard edges as well, that would be great.
|
|