Max:
Welcome to MAXScript.
Unable to load file C:\Users\mauriciovrc\Autodesk\3ds Max 2016\Max Creation Graph\Tools\Downloads\Vu_Stitches\Compounds\Array3.maxcompound as graph: An item with the same key has already been added.
Unable to load file C:\Users\mauriciovrc\Autodesk\3ds Max 2016\Max Creation Graph\Tools\Downloads\Vu_Stitches\Compounds\GreaterThanZero.maxcompound as graph: An item with the same key has already been added.
Unable to load file C:\Users\mauriciovrc\Autodesk\3ds Max 2016\Max Creation Graph\Tools\Downloads\Vu_Stitches\Compounds\MinusOne.maxcompound as graph: An item with the same key has already been added.
Unable to load file C:\Users\mauriciovrc\Autodesk\3ds Max 2016\Max Creation Graph\Tools\Downloads\Vu_Stitches\Compounds\PlusOne.maxcompound as graph: An item with the same key has already been added.
Unable to load file C:\Users\mauriciovrc\Autodesk\3ds Max 2016\Max Creation Graph\Tools\Downloads\Vu_Stitches\Compounds\SelectByIndex.maxcompound as graph: An item with the same key has already been added.
Unable to load file C:\Users\mauriciovrc\Autodesk\3ds Max 2016\Max Creation Graph\Tools\Downloads\Vu_Stitches\Compounds\Sum.maxcompound as graph: An item with the same key has already been added.
RappaTools3.Stuff()
RappaTools3.41 - remusjuncu.com/
MaxVersion is: 18000
OutFile is: c:\\Unfold3dBridge_TMP\\unfold3D_TMP.obj
GetFile is: c:\\Unfold3dBridge_TMP\\unfold3D_TMP_out.obj
Rizom:
ZomLoadPrefs(none)
ZomSet({Path=""})
-- On line Lua 5.2 reference manual:
www.lua.org/manual/5.2/-- Unofficial Lua FAQ:
www.luafaq.org/-- DISCLAIMER: The LUA script interface is subject to change.
-- _MSC_FULL_VER 190024215
-- RizomUV 2018.0.102.g65f0f6b is Ready
ZomLoad({File={XYZ=true, ImportGroups=true, Path="C:/Unfold3dBridge_TMP/unfold3D_TMP.obj"}, NormalizeUVW=true})
ZomSet({Path="Prefs.FileSuffix", Value="_out"})
ZomSet({Path="Prefs.UI.Display.UnfoldOptimize", Value=true})
ZomSet({Path="Prefs.UI.Display.PackLayout", Value=true})
ZomSet({Path="Prefs.UI.Display.IslandProperties", Value=true})
ZomSet({Path="Prefs.UI.Display.Grid", Value=false})
ZomSet({Path="Prefs.UI.Display.ColorMap", Value=false})
ZomSet({Path="Prefs.UI.Display.MultiTile", Value=false})
ZomSet({Path="Prefs.UI.Display.TextureTransform", Value=false})
ZomSet({Path="Prefs.UnfoldIte", Value=1})
ZomSet({Path="Prefs.Optimize.Iterations", Value=10})
ZomSet({Path="Prefs.Optimize.Mix", Value=1})
ZomSet({Path="Prefs.Optimize.AngleDistanceMix", Value=1})
ZomSet({Path="Prefs.TriangleFlipsOn", Value=true})
ZomSet({Path="Prefs.BorderIntersectionsOn", Value=true})
ZomSet({Path="Prefs.RoomSpace", Value=0.001})
ZomSet({Path="Vars.Unwrap.FreeSelectionLimit", Value=true})
ZomSet({Path="Vars.Unwrap.FillHoles", Value=true})
ZomIslandGroups({Mode="SetGroupsProperties", GroupPaths={ "RootGroup" }, Properties={Pack={MarginSize=0.002}}})
ZomIslandGroups({Mode="SetGroupsProperties", GroupPaths={ "RootGroup" }, Properties={Pack={SpacingSize=0.004}}})
ZomSet({Path="Prefs.PackOptions.MapResolution", Value=1024})
ZomSet({Path="Prefs.UI.DisplayRealDim", Value=false})
ZomIslandGroups({Mode="SetGroupsProperties", GroupPaths={ "RootGroup" }, Properties={Pack={Resolution=200}}})
ZomIslandGroups({Mode="SetGroupsProperties", GroupPaths={ "RootGroup" }, Properties={Pack={MaxMutations=1}}})
ZomSet({Path="Prefs.PackOptions.__Recursive", Value=true})
ZomSet({Path="Prefs.PackOptions.__BestFit", Value=true})
ZomIslandGroups({Mode="SetGroupsProperties", GroupPaths={ "RootGroup" }, Properties={Pack={Rotate={Mode=2}}}})
ZomIslandGroups({Mode="SetGroupsProperties", GroupPaths={ "RootGroup" }, Properties={Pack={Rotate={Step=0}}}})
ZomIslandGroups({Mode="SetGroupsProperties", GroupPaths={ "RootGroup" }, Properties={Pack={Rotate={Min=0}}}})
ZomIslandGroups({Mode="SetGroupsProperties", GroupPaths={ "RootGroup" }, Properties={Pack={Rotate={Max=180}}}})
ZomSet({Path="Prefs.Grid.SnapOn", Value=true})
ZomSet({Path="Prefs.Grid.Visible", Value=true})
ZomSet({Path="Prefs.Grid.SubdivU", Value=10})
ZomSet({Path="Prefs.Grid.SubdivV", Value=10})
ZomSet({Path="Vars.Viewport.ColorMapIDDisplayMode", Value=5})
ZomIslandGroups({Mode="SetMultiTileLayout", GroupPath="RootGroup", TileColumns=1})
ZomIslandGroups({Mode="SetMultiTileLayout", GroupPath="RootGroup", TileRows=1})
ZomSet({Path="Prefs.Viewport.TileIDDisplay", Value="_U_V"})
ZomSet({Path="Lib.Mesh.RootGroup.TopoStable.TileRatioMode", Value="1:1"})
ZomSet({Value={ 2, 2, 1}, Path="Lib.Mesh.RootGroup.TopoStable.Tiling", UndoAble=true})
ZomSet({Path="Vars.EditMode.ElementMode", Value=1})
ZomSet({Path="Prefs.EdgeLoopMaxAngle", Value=180})
ZomSet({Path="Prefs.EdgeLoopMaxAngleEnable", Value=false})
ZomSet({Path="Prefs.EdgeLoopMaxNum", Value=10})
ZomSet({Path="Prefs.EdgeLoopMaxNumEnable", Value=false})
ZomSet({Path="Prefs.EdgeLoopGeometryBased", Value=false})
ZomSet({Path="Vars.AutoSelect.Hierarchical.OpenMesh", Value=true})
ZomSet({Path="Vars.AutoSelect.Hierarchical.Leafs", Value=true})
ZomSet({Path="Vars.AutoSelect.Hierarchical.Branches", Value=false})
ZomSet({Path="Vars.AutoSelect.Hierarchical.Trunk", Value=false})
ZomSet({Path="Vars.AutoSelect.Mosaic.Developability", Value=0.5})
ZomSet({Path="Vars.AutoSelect.Mosaic.IslandCountManual", Value=false})
ZomSet({Path="Vars.AutoSelect.Mosaic.IslandCount", Value=2})
ZomSet({Path="Vars.AutoSelect.SharpEdges.Angle", Value=35})
ZomSet({Path="Vars.AutoSelect.Box.XPYP", Value=true})
ZomSet({Path="Vars.AutoSelect.Box.XPYM", Value=true})
ZomSet({Path="Vars.AutoSelect.Box.XMYP", Value=true})
ZomSet({Path="Vars.AutoSelect.Box.XMYM", Value=true})
ZomSet({Path="Vars.AutoSelect.Box.XPZP", Value=true})
ZomSet({Path="Vars.AutoSelect.Box.XPZM", Value=true})
ZomSet({Path="Vars.AutoSelect.Box.XMZP", Value=true})
ZomSet({Path="Vars.AutoSelect.Box.XMZM", Value=true})
ZomSet({Path="Vars.AutoSelect.Box.YPZP", Value=true})
ZomSet({Path="Vars.AutoSelect.Box.YPZM", Value=true})
ZomSet({Path="Vars.AutoSelect.Box.YMZP", Value=true})
ZomSet({Path="Vars.AutoSelect.Box.YMZM", Value=true})
ZomSet({Path="Vars.AutoSelect.Smooth.Mode", Value="Off"})
ZomSet({Path="Vars.AutoSelect.Smooth.Force", Value=0.47})
ZomSet({Path="Vars.AutoSelect.CutHandles", Value=false})
ZomSet({Path="Vars.AutoSelect.LinkHoles", Value=false})
ZomSet({Path="Vars.AutoSelect.Bijectiver", Value=false})
ZomSet({Path="Vars.AutoSelect.BijectiverMinQ", Value=0.25})
ZomSet({Path="Vars.AutoSelect.ReWeld", Value=false})
ZomSet({Path="Vars.AutoSelect.ReWeldThreshold", Value=0.15})
ZomSet({Path="Vars.AutoSelect.ReWeldPolyMax", Value=2})
ZomSet({Path="Vars.AutoSelect.FlatteningMode", Value="Auto"})
-- explorer C:\Unfold3dBridge_TMP
ZomSet({Path="Prefs.PolygonMagicWand.MaxRelativeAngle", Value=11})
ZomSelect({PrimType="Edge", ResetBefore=true, Select=true, XYZSpace=true, FilterIslandVisible=true, PyramidalFrustum={Section={ -80.8235, 36.3971, 226.938, -80.7883, 36.3971, 226.938, -80.7883, 36.3293, 226.938, -80.8235, 36.3293, 226.938}, SectionNormal={-0, -0, -1}, Height=1e+10, Apex={-81.0406, 36.4555, 229.234}, Crossing=true}, Raycast=true})
ZomSet({Path="Vars.Proportional.FallOffDistance", Value=0.4})
ZomSet({Path="Vars.Proportional.FallOffDistance", Value=0.32})
ZomSet({Path="Vars.UI.Display.DialogKeyboardMouseCustomizerShown", Value=true})
ZomSet({Path="Prefs.MousePresetMode", Value=3})
ZomSavePreferences(none)
ZomSet({Path="Vars.UI.Display.DialogKeyboardMouseCustomizerShown", Value=false})
ZomSet({Path="Prefs.PolygonMagicWand.MaxRelativeAngle", Value=10})
ZomSelect({PrimType="Edge", ResetBefore=true, Select=true, XYZSpace=true, IDs={ 2910}, List=true})
ZomSelect({PrimType="Edge", Select=true, Loop={}, ResetBefore=true, XYZSpace=true, IDs={ 2910}})
ZomSet({Path="Prefs.PolygonMagicWand.MaxRelativeAngle", Value=9})
ZomSelect({PrimType="Edge", Select=true, XYZSpace=true, IDs={ 852}, List=true})
ZomSelect({PrimType="Edge", Select=true, Loop={}, XYZSpace=true, IDs={ 852}})
ZomSelect({PrimType="Edge", Select=true, XYZSpace=true, IDs={ 1959}, List=true})
ZomUndo(none)
-- Undo: Select
ZomSelect({PrimType="Edge", Select=true, XYZSpace=true, IDs={ 1962}, List=true})
ZomSelect({PrimType="Edge", Select=true, Loop={}, XYZSpace=true, IDs={ 1962}})
ZomCut({PrimType="Edge"})
ZomUnfold({PrimType="Edge", MinAngle=1e-05, Mix=1, Iterations=1, PreIterations=5, StopIfOutOFDomain=false, RoomSpace=0.001, PinMapName="Pin", ProcessNonFlats=true, ProcessSelection=true, ProcessAllIfNoneSelected=true, ProcessJustCut=true, BorderIntersections=true, TriangleFlips=true, FreeSelectionBorders=true, FillHole=true})
ZomIslandGroups({Mode="DistributeInTilesByBBox", MergingPolicy=8322})
ZomIslandGroups({Mode="DistributeInTilesEvenly", MergingPolicy=8322, UseTileLocks=true, UseIslandLocks=true})
ZomPack({ProcessTileSelection=false, RecursionDepth=1, RootGroup="RootGroup", Scaling={}, Rotate={}, Translate=true, LayoutScalingMode=2})
ZomSelect({PrimType="Edge", ResetBefore=true, Select=true, FilterIslandVisible=true, PyramidalFrustum={Section={ 0.378986, 0.688021, 3.24078, 0.396244, 0.688021, 3.24078, 0.396244, 0.668452, 3.24078, 0.378986, 0.668452, 3.24078}, SectionNormal={-0, -0, -1}, Height=1e+10, Apex={0.387487, 0.681498, 3.27352}, Crossing=true}, Raycast=true})
ZomSelect({PrimType="Edge", ResetBefore=true, Select=true})
ZomSave({File={Path="C:/Unfold3dBridge_TMP/unfold3D_TMP_out.obj", UVWProps=true}, __UpdateUIObjFileName=true})
ZomSet({Path="Prefs.UI.Display.ScriptLog", Value=true})
The dialog that appear is: Unfold was closed wothout save