Post by chrisell on Aug 10, 2017 21:15:36 GMT
If I have grouped some islands and I want to align the islands inside the group to be either vertical or horizontal, I can pick an edge and use the edge-vertical or edge-horizontal function and re-pack.
However, when selecting the edge, the colour doesn't change - it stays the colour of the group outline (in this example, purple). When de-selected, the edge is still the same colour so there is no way to tell that a selected edge of an island in a group has been constrained.
The edge in this example is circled in yellow, and constrained to vertical, but you'd never know from the GUI.
However, when selecting the edge, the colour doesn't change - it stays the colour of the group outline (in this example, purple). When de-selected, the edge is still the same colour so there is no way to tell that a selected edge of an island in a group has been constrained.
The edge in this example is circled in yellow, and constrained to vertical, but you'd never know from the GUI.
